Formula 2000 is designed to treat iron and some calcium in well water with 15 grains or more of hardness and a pH of 6.5 or more. One gallon of Rid O’ Rust® Formula 2000 will treat 125,000 gallons of well water with 1ppm of iron. It is made for use with hard water and for irrigation applications only.

It is one thing to remove existing rust stains; it is another to keep them from coming back. Preventing stains requires installing a system that feeds a special chemical into the irrigation line. We call these chemicals our Rid O’ Rust rust stain prevention Formulas. Sold as concentrates, the Formulas are mixed with water in a feeder tank and then fed into the irrigation line.

Rid O’ Rust Formula products “chelate” or “sequester” the ferrous iron (as well as other minerals in well water), preventing the ferrous iron from combining with oxygen to form ferric oxide— RUST.

Rid O’ Rust Formula products do not actually remove the iron, they neutralize the iron so that it won’t react with air. The Formulas are introduced into a well water line via a feeder system—either a siphoning system or an injection system. The amount of Formula to be mixed in the feed tank with water is determined by analysis of the well water and a determination of the irrigation system’s maximum flow rate.

NOTE: Rid O’ Rust will not be effective under certain circumstances.

Warranty Information: The warranty will be applied in case of inappropriate amount of ingredients and that under stated conditions, they should perform as represented. Many factors can affect the performance of the product. Therefore there is no blanket guarantee of this product.