| |
Membrane: advanced thin film composite for maximum
rejection of impurities
Membrane Housings: standard stainless steel housings
for PRO-150, PRO-300, PRO-450. Standard PVC housings for
PRO-600, PRO-1200 and PRO-1800 (stainless steel optional)
Process Pump: direct coupled brass rotary vane type
designed for continuous high pressure service
Frame: corrosion resistant powder coated steel
Pre-Sediment Filter: 5 micron rated filter for removal
of sediment and protection of system
Pre-Carbon Filter: granular activated radial flow
carbon filter for removal of chlorine must be replaced regularly
Flow Meters: precise monitoring of operating conditions
with three flow meters for product, waste and recycle streams
(PRO-600/1200/1800 only)
Control Box: NEMA 12X rated control box with on/off
switch and mode indicating lights (PRO-600/1200/1800 only)
Pre-Filter Isolation Valve: convenient shut off valve
for easy filter replacement
Pressure Gauges: high quality 2.5" liquid filled
process pressure gauge for monitoring operating pressure.
1" dry pressure gauge's for monitoring filter operation
Low Pressure Cut-Out: insufficient feed water will
automatically shut the system down protecting the process
pump
Tank Full Switch: RO system will automatically start
when tank pressure falls below 30 psi and stop when pressure
reaches 50 psi
Air Purge: system automatically purges air out of
pump and membranes before start up (PRO-600/1200/1800 only)
Simple Maintenance/Inspection: all PRO Series components
are strategically located on the frame for easy access and
inspection |
|
